3-Zone Mixer/preamp with 5 stereo inputs, 4 equipped with rear-panel gain and freely routable to output zones
ZPR3520 | 3-ZONES
The ZPR3520 is a 3-Zone mixer / preamplifier with two stereo and one mono zone output. On the choice of the installer, the zones can be level-controlled by either the internal front-panel control or an external potentiometer control (ZCP10A, optional). Every output zone’s source signal can be freely chosen from any of the 4 stereo inputs, with two of these stereo inputs re-routable to the front side 3.5mm TRS stereo input and the rear-side balanced stereo input (FOH), thus providing connectivity to both mobile players and balanced sources like a connected DJ or stage mixer. Two microphone inputs with switchable priority can either be included or excluded in/from every zone. Additional 2-Band EQs for every zone output and the music mute and emergency signal inputs with automatic priority make the ZPR3520 a truly versatile core of any installed sound system.
Features:
5 stereo inputs, 4 equipped with rear-panel gain and freely routable to output zones A | B | C. 5th input only routable to Zone C.
Rear-panel balanced stereo input (FOH input) and frontside 3.5mm stereo TRS jack, routable to zones A | B | C in lieu of stereo input 1 and 4 respectively
2x Mic inputs with rear-side 1/4” TRS connectors and gain control
12V phantom power for microphones by internal jumper
Voice-specific 2-Band EQ plus “on air” switches for mic inputs
Auto talk-over for automatic music level reduction when microphone is used, damping level adjustable per zone.
Microphone include/exclude switch per zone
Microphone level setting per zone
Two stereo output zones and one mono output zone
5 LED level meter for every zone
Rear-side adjustable 2-Band EQ for each zone
Volume control for every zone switchable between front-panel volume control and rear-panel connected external remote control potentiometer (optional, recommended control panel ZCP10A)
Balanced TRS and Phoenix output connectors for each zone
Emergency input which shuts down master output when emergency signal comes in and plays emergency signal instead
Output mute contact to externally mute the output
Full metal case with brushed aluminum front panel and detachable rack ears
CE/ROHS compliant
Data:
Signal/Noise >82dB (Line)
Crosstalk Damping >65dB (Line)
THD <0.05% (Line)
Frequency response 20Hz – 20 kHz
Dimension 483.0×44.5×183.5 mm WxHxD
Weight 2.2 kg
Compliance: EMC/Safety Compliance:
EU safety: EN 60065:2001 +A1
EU EMC: EN55103-1:1997, EN55103-2: 1997
US safety: UL60065
US EMC: FCC Part 15
This product meets both the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.
Environmental Compliance:
This product is manufactured in accordance with EG directive 2002/95/EG of the European Union on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
This product does not contain more than 0.1% of weight of the SVHCs listed in annex XIV of the REACH regulation EC 1907/2006.
ZPR3520 | 3-ZONES
The ZPR3520 is a 3-Zone mixer / preamplifier with two stereo and one mono zone output. On the choice of the installer, the zones can be level-controlled by either the internal front-panel control or an external potentiometer control (ZCP10A, optional). Every output zone’s source signal can be freely chosen from any of the 4 stereo inputs, with two of these stereo inputs re-routable to the front side 3.5mm TRS stereo input and the rear-side balanced stereo input (FOH), thus providing connectivity to both mobile players and balanced sources like a connected DJ or stage mixer. Two microphone inputs with switchable priority can either be included or excluded in/from every zone. Additional 2-Band EQs for every zone output and the music mute and emergency signal inputs with automatic priority make the ZPR3520 a truly versatile core of any installed sound system.Features:
Data:
Compliance:
EMC/Safety Compliance:
Environmental Compliance: