Cable Reels, Stage Boxes & Wall Plates

Cover plate to blank off XLR-hole.? Part No. 60801-20 Material 1.0mm Steel Description Cover plate to blank off XLR-hole. ...

There are many applications for these blanks: They can either be used as wall or table sockets, or for conferences. The holes are pre-cut and the ...

Roll over Beethoven... or anyone else for that matter. These are the official cable reels for musicians, soundmen, and broadcasting technici...

Roll over Beethoven...or anyone else for that matter. These are the official cable reels for musicians, soundmen, and broadcasting technicians. The...

2 unit Front panel, 1 Module wide. Vented.  Part No. 20301-20 Material 1.0mm Steel Weight 24g

Corner extrusion.Available in 1 to 10 modules or 2m lengths.Material: Aluminium. Part No: Module: Length: Weight: 10301-20 1 Module 44mm 12g 1...

Endplate for Rack Box or Stage Box, 3 units high. Part No. 52230-20 Material 1.5mm Steel Description Plain Weight 60g

3U Front panel, plain. Part No. 30202-20 Material 1.0mm Steel Description 2 Modules wide

Front panel, 1 Module wide.Punched for 2 x D-sub 25. Part No. 20515-20 Material 1.0mm Steel Weight 26g

Front panel, 2 Modules wide.Punched for Neutrik G-Series Speakon/ Ampheonl EP Connectors. Part No. 20613-20 Material 1.0mm St...

Module, 4U x 5M, plain Part No. 40205-20 Material 1.0mm Steel Description 5 Modules wide Weight 0.31kg

Endplate, 4U x 1U Part No. 52140-20 Material 1.5mm Steel Description Plain Weight 0.16kg

2 Unit Front Module, _ Module wide.Punched for 2 x BNC. Part No. 225522-20 Material 1.0mm Steel Finish Black

2 Unit Front Module, 1/2 Module wide.Punched for D-Sub 25. Part No. 205515-20 Material 1.0mm Steel Finish Black

Endplate, 4U x 2U, 1 Socapex/LK37 Part No. 52241-20 Material 1.5mm Steel Description Punched for Socapex/LK37 Weight 80g ...

Front panel, 2 Modules wide.Punched for CEE 380V/16 Amp. Part No. 30721-20 Material 1.0mm Steel Weight 20g

Module, 4U x 2M, 2 Speakon Punched for 2 x Neutrik G-Series Speakon/ 28pin Ringlock Connectors. Part No. 40511-20 Material: 1.0mm St...

Endplate, rackmount 4 units high x 2 units deep. Part No. 52242-20 Material 1.5mm Steel Description Punched for CEE 380V/16Am...

Front panel, 1 Module wide.Punched for 2 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.) ? Part No. 20511-20 Material 1.0...

Endplate, Stage box. 2 x 2 units. Part No. 50240-20 Material 1.5mm Steel Description 2 x 4 units, Plain Weight 0.16kg...

Endplate, Stage box. 2 x 2 units. Part No. 50143-20 Material 1.5mm Steel Description 1 x 4 units, Punched for PG16 cable gl...

Stage Box punched for Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.)Can be fitted with a Multi-Pin Connector or a Cable Gland (with an Adap...

There are many applications for these blanks: They can either be used as wall or table sockets, or for conferences. The holes are pre-cut and the ...

Roll over Beethoven... or anyone else for that matter. These are the official cable reels for musicians, soundmen, and broadcasting technicians. T...

Black screws 8x13.Sold as a pack of 4.For Endplates to Extrusions.  Part No. 95813-20 Material Steel Weight 1g

Black screws B8x6.Sold as a pack of 4For endplates to front modules.  Part No. 95806-20 Material Steel Weight 1g

Black screws B6x6 for Front Modules to Extrusions. Material Steel Weight 5g

Set of 4 rubber feet, includes screws. ? Part No. 91450-20 Material Rubber / Steel Weight 21g

Endplate, rackmount 4 units high x 2 units deep.? Part No. 52245-20 Material 1.5mm Steel Description Punched for PG29 cable...

Endplate, rackmount 4 units high x 2 units deep.? Part No. 52244-20 Material 1.5mm Steel Description Punched for PG21 cab...

Endplate, rackmount 4 units high x 2 units deep. Part No. 52240-20 Material 1.5mm Steel Description Plain Weight 0.24...

Endplate, rackmount 4 units high x 1 unit deep. Part No. 52144-20 Material 1.5mm Steel Description Punched for PG21 cable...

Endplate, rackmount 4 units high x 1 unit deep.? Punched for PG16 cable-gland Part No. 52143-20 Material 1.5mm Steel Descriptio...

Endplate, Stage box. 2 x 2 units. Part No. 50140-20 Material 1.5mm Steel Description 1 x 4 units, plain Weight 92g ...

Front panel, 1 Module wide.Punched for 4 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.) Part No. 40511-20 Material: 1...

Stage boxes punched for D-series connectors.Can be fitted with a multi-pin connector or cable gland (with adapter?plate). Black Powder coated.Stage...