ARX - MIXX - 4 Channel Mic/line Mixer With 3 Band EQ & Zoning
ARX introduces the MIXX 4 channel Microphone/Line mixer,with 3 way EQ on all four channels, plus Balanced XLR master outputs on the rear. It's the companion product to the MIXXMaster: another innovative mixing product. Use the MIXX for more microphone channels; use the MIXXMaster for more line channels.
Each Microphone/Line input on the MIXX has 3 way EQ and Pan controls, plus Balanced Low Noise Microphone pre-amps. All 4 Channels also have a direct output, ideal for recording applications.
Switchable Phantom power is available on all four Mic Inputs
Both the MIXX and MIXXMaster models are available as a 100 to 120V AC model or a 220 to 240V AC model, and AC power is connected to the unit via a standard three pin IEC connector, with built-in fuse and voltage change switch.
With its superb audio quality, massive headroom and intuitive interface, the MIXXMaster and the MIXX series are the total solution to today’s install requirements.
- Only 1 RU high
- Balanced XLR Mic Inputs and Outputs
- 3 way EQ and Pan controls
- Switchable Phantom power
- User friendly layout
- Flawless performance in any audio environment
- Sound Reinforcement
- Industrial Paging/BGM Systems
- AV Systems/CD/VIDEO
- Studio, Live and Broadcast Submixers
- Mic Pre-amp/Mixer for Hard disk recording, Modular Digital Multitrack, ADAT
|Variable 20dB-60dB on each channel by rear panel trim control, plus Mic/Line input switch
|Infinity to +6dB Gain
|True L and R constant level Control
|Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
|20-20KHz +or- 1dB
|Below .005% 100Hz to 10KHz
|Master Outputs Signal/Noise:
|+48VDC switchable on all Microphone Inputs
|Electronically Balanced XLR connector
|150 Ohms Line Level jack connector
|Electronically Balanced XLR 300 ohms Line Level
|Max Output Level:
|Supplied as 100-120 VAC model or 220-240 VAC model 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable