Konig And Meyer

Practical and sturdy base plate for all common spacer tubes and tube combinations with M20 threaded bolts. An ergonomic carrying handle, a cable grommet, and four sturdy rubber feet are additional useful features. It measures 550 x 550 mm and weighs 13.5 kg. Specifications: Dimensions: 550 x 550 x 23 mm EAN: 4016842122486 Material: steel Special features: flat steel plate; with practical carrying handle and cable duct. Threaded connector: M20 Type: structured black Weight: 13.5 kg

Attractive stand for lights and loudspeakers. Thanks to the heavy, flat steel plate (550 x 550 mm), the stand is ideal for use in confined spaces. A practical carrying handle, a cable grommet, and four sturdy feet are additional useful features. The usable height is between 1,420 and 2,420 mm and can be adjusted in five steps of 200 mm. The proven K&M clamping screw and robust locking bolt are used for fastening. The integrated M10 threaded bushing allows for the attachment of a crossbar or the direct mounting of lights. The maximum load capacity when fully extended is 30 kg. Specifications: Base Plate Dimensions: 550 x 550 mm Color: Black Foot construction: Flat steel plate EAN: 4016842122721 Height: From 1,420 to 2,420 mm Height adjustment: Locking bolt and locking screw Material: Steel Quality level: Starline Pipe end(s): ø 35 mm, integrated threaded bushing M10 for traverses Pipe combination: 1-way extendable Load capacity*: 30kg Special feature: Integrated shock absorber; step-by-step height adjustment; there are three ways to position the column as required Weight: 17.5 kg * With centric load, on a horizontal surface and without lateral forces (wind, impacts, etc.)

K&M - 01-87-161-55 - Clamping Prisum For 12210 etc.

Short support arms for the "Omega" 18800, 18810, and 18820 keyboard stands. The support arms are only 264 mm long, making them ideal for electric pianos and keyboards with a shallow depth. The large, round rubber pads ensure a secure, non-slip grip. Specifications: Depth: 264mm EAN: 4016842114900 Color: black Weight: 0.94kg Material: steel Product Category : Topline Special Feature: ideal for electric pianos and keyboards with a small depth

Replacement Winding Handle for 24740-00-55 Lighting Stand.

This X-stand made of aluminum is lightweight and yet extremely stable. The arrangement of the double-braced stand tubes provides noticeably more stability and safety. The ergonomic clamping lever allows a quick and easy mounting or folding in no time at all. The sturdy metal joint is finely interlocked and adjustable in 5° steps enabling several different positions. With the help of a scale you can quickly find your preferred position again. The two rear rubber end caps can be moved axially and can therefore be perfectly adapted to the width of the keyboard. The maximum support depth is 350 mm. The typical quality features of K&M such as solid workmanship, high-quality finish and an adjustable rubber end cap for uneven floors complete the overall concept. The attachment 18941 offers the possibility to extend the stand for a second keyboard. Adjustment: clamping lever for quick adjustment EAN: 4016842114788 Height: from 594 to 946 mm Instrument support: non-marring slip-proof pad Material: Aluminium Max. load capacity: 50 kg Product Category: Topline Shape: double-braced x-stand Special features: extremely lightweight; adjustable end cap to stabilize the stand on uneven surfaces Support depth: 350 mm Support width: from 327 to 789 mm Type: black Weight: 2.45 kg

The speaker wall mount allows you to install speakers on the wall. This mount is compatible with the Yamaha speakers listed below and allows you to easily adjust the position and angle of the speakers. Easy installation by simply hooking and screwing. Direct fit: DBR12, DBR10, CBR12, CBR10, HS8I, HS7I Requires Yamaha's U-bracket: DZR10, CZR10, DXR10mkII, DXR8mkII, DHR10, CHR10 Mounting plate: 180 x 90 mm Distance from wall: 271 mm Hole spacing: 60 to 70 mm or 115 to 150 mm Fastening: Wall mounting Load capacity: 25 kg Inclination: -45° to 45° Swivel range: 360° Adjustment: Stepless Material: Steel EAN: 4016842122936 Execution: black Weight: 2.3 kg Special feature: Direct Fit: DBR12, DBR10, CBR12, CBR10, HS8I, HS7I Requires Yamaha U-Bracket: DZR10, CZR10, DXR10mkII, DXR8mkII, DHR10, CHR10

The speaker ceiling mount allows speakers to be installed on the ceiling. This mount is compatible with the Yamaha speakers listed below and allows easy adjustment of the position and angle of the speakers. Easy installation by simply hooking and screwing. Direct fit: DBR15, DBR12, DBR10, CBR15, CBR12, CBR10, HS8I, HS7I Requires Yamaha U-Bracket: DZR12, DZR10, CZR15, CZR12, CZR10, DXR12mkII, DXR10mkII, DXR8mkII, DHR12, DHR10, CHR12, CHR10 Mounting plate: 180 x 90 mm Ceiling clearance: 180 mm Ceiling panel: 160 x 126 mm Hole spacing: 60 to 70 mm or 115 to 150 mm Fastening: Ceiling mounting Load capacity: 25 kg Inclination: 0° to 75° Swivel range: 90° Adjustment: Stepless Material: Steel EAN: 4016842122998 Execution: black Weight: 2.2 kg Special feature: Direct Fit: DBR15, DBR12, DBR10, CBR15, CBR12, CBR10, HS8I, HS7I Requires Yamaha U-Bracket: DZR12, DZR10, CZR15, CZR12, CZR10, DXR12mkII, DXR10mkII, DXR8mkII, DHR12, DHR10, CHR12, CHR10

This exclusive microphone arm with 3/8" or 5/8" thread connection in an attractive design and innovative table clamp enables the quick and flexible alignment of microphones in studios or multimedia workstations. Microphones weighing up to 1.5 kg can be easily held in any position. With a clamping range of 10 to 51 mm / ø 15 to ø 51 mm, the clamp offers a wide range of fastening options. The stable metal frame with high-quality plastic inserts and anti-slip pad ensures a secure and powerful clamp. Thanks to the specially shaped clamping surfaces, the clamp can be used on smooth surfaces as well as round tubes. The microphone arm can also be optionally attached with the additionally available table flange 23855. Clamping range: 10 to 51 mm / ø 15 to ø 51 mm Special Feature: including four cable clamps EAN: 4016842108671 Length: from 460 to 960 mm Material: aluminum, steel Max. load capacity: 1.5 kg Threaded connector: 3/8" and 5/8" Type: black Weight: 1.056 kg

Separate weight plate to increase stability, for speaker stands with M20 base plate. The plate has a diameter of 325 mm and a thickness of 8 mm. There is an additional hole for a possible cable feed-through. Self-adhesive rubber buffers ensure non-slip, low-noise use. The weight is 5 kg. The additional weight can be installed easily and without tools. Several plates can also be stacked on top of each other. Specifications: EAN: 4016842122042 Size: 325 mm Color: Black Structure Material: Steel Height: 8mm Drilling: ø 43.5 mm (2 x) Weight: 4.97 kg

Practical carrying bag for the 26712/26713 base plate M with dimensions of 489 x 489 mm. The tear-resistant nylon fabric protects the base from dirt and scratches. The robust zipper and comfortable carrying handles offer additional comfort and safety. Specifications: EAN: 4016842122059 Size: 489 x 489 x 30 mm Handle or carrying style: Carrying handle Material: Nylon Closure: Zipper Weight: 0.39 kg

Practical carrying bag for the 26707/26711 base plate S with dimensions of 406 x 406 mm. The tear-resistant nylon fabric protects the base from dirt and scratches. The robust zipper and comfortable carrying handles offer additional comfort and safety. Specifications: EAN: 4016842122042 Size: 406 x 406 x 30 mm Handle or carrying style: Carrying handle Material: Nylon Closure: Zipper Weight: 0.29 kg

Practical and solid base plate for all common spacer tubes and tube combinations with M20 threaded bolts. There are three ways to position the column as required. In addition to the central and off-center position, there is also the option of attaching the tube combination in the corner. An ergonomic carrying handle, a cable duct and four stable rubber feet are other useful features. The dimensions are 550 x 550 mm and the weight is 13.5 kg. Specifications: Base Plate Dimensions: 550 x 550 x 23 mm Color: Black Structure EAN: 4016842122509 Threaded connection: M20 Material: Steel Special features: Flat steel plate; with practical carrying handle and cable duct; depending on requirements, there are three ways to position the column Weight: 13.5 kg

Practical and solid base plate for all common spacer tubes and tube combinations with M20 threaded bolts. There are three ways to position the column as required. In addition to the central and off-center position, there is also the option of attaching the tube combination in the corner. An ergonomic carrying handle, a cable duct and four stable rubber feet are other useful features. The dimensions are 489 x 489 mm and the weight is 10.7 kg. Specifications: Color: Black structure Base Plate Size: 489 x 489 x 23 mm EAN: 4016842122066 Threaded connection: M20 Material: Steel Special features: Flat steel plate; with practical carrying handle and cable duct; depending on requirements, there are three ways to position the column Weight: 10.7 kg

Practical and solid base plate for all common spacer tubes and tube combinations with M20 threaded bolts. There are three ways to position the column as required. In addition to the central and off-center position, there is also the option of attaching the tube combination in the corner. An ergonomic carrying handle, a cable duct and four stable rubber feet are other useful features. The dimensions are 406 x 406 mm and the weight is 7.5 kg. Specifications: Base Plate Size: 406 x 406 x 23 mm Color: Black Structure EAN: 4016842122578 Threaded connection: M20 Material: Steel Special features: flat steel plate; with practical carrying handle and cable duct; depending on requirements, there are three ways to position the column Weight: 7.5 kg

Attractive tripod for lights and loudspeakers. Thanks to the heavy, flat steel plate (550 x 550 mm), the tripod is ideal for use where space is limited. There are three ways to position the column as required. In addition to the centric and off-center position, the tube combination can also be attached in the corner. A practical carrying handle, a cable duct and four stable feet are other useful features. The usable height is between 1,420 and 2,420 mm and is achieved in 5 steps of 200 mm. The tried and tested K&M clamping screw and the robust locking bolt are used for fixing. The integrated M10 threaded bushing enables a crossbar to be attached or lights to be attached directly. The maximum centric load capacity when fully extended is 30 kg. Specifications: Base Plate Dimensions: 550 x 550 mm Color: Black Foot construction: Flat steel plate EAN: 4016842122721 Height: From 1,420 to 2,420 mm Height adjustment: Locking bolt and locking screw Material: Steel Quality level: Starline Pipe end(s): ø 35 mm, integrated threaded bushing M10 for traverses Pipe combination: 1-way extendable Load capacity*: 30kg Special feature: Integrated shock absorber; step-by-step height adjustment; there are three ways to position the column as required Weight: 17.4 kg * With centric load, on a horizontal surface and without lateral forces (wind, impacts, etc.)

Attractive tripod for lights and smaller loudspeakers. Thanks to the heavy, flat steel plate, the tripod is ideal for use where space is limited. There are three ways to position the column as required. In addition to the centric and off-center position, the tube combination can also be attached in the corner. A practical carrying handle, a cable duct and four stable feet are other useful features. The height is fixed with a safety hook and secured with a clamping screw to ensure low noise and no play. The slim design of the clamp allows space-saving transport and ensures a discreet appearance. The usable height is between 1,420 and 2,420 mm and is achieved in 5 steps of 200 mm. The integrated M10 threaded bushing enables a crossbar to be attached or lights to be attached directly. The maximum load capacity with centric loading in the middle position is 20 kg. Specifications: Base Plate Dimensions: 489 x 489 mm Color: Black Foot construction: Flat steel plate EAN: 4016842122035 Height: From 1,420 to 2,420 mm Leg construction: Clamping screw and safety hook Material: Steel Quality level: Topline Pipe end(s): ø 35 mm, integrated threaded bushing M10 for traverses Pipe combination: 1-way extendable Load capacity*: 20kg Special feature: integrated shock absorber; step-by-step height adjustment; there are three ways to position the column as required Weight: 14.4 kg * With centric load, on a horizontal surface and without lateral forces (wind, impacts, etc.)

Our strongest speaker stand with a space-saving base plate. Thanks to the heavy, flat steel plate (550 x 550 mm), the stand is ideal for use where space is limited. There are three ways to position the column as required. In addition to the centric and off-center position, it is also possible to attach the tube combination in the corner. A practical carrying handle, a cable duct and four stable feet are other useful features. The usable height is between 1,110 and 1,810 mm and is achieved in 4 steps of 175 mm. The tried and tested K&M clamping screw and the robust locking bolt are used for fixing. The maximum, centric load capacity when fully extended is 50 kg. Specifications: Installation dimensions: 550 x 550 mm Color: Black Foot construction: Flat Steel Plate EAN: 4016842122967 Height: From 1,110 to 1,810 mm Height adjustment: Locking bolt and locking screw Material: Steel Quality level: Staline Pipe end(s): ø 35 mm Pipe combination: 1-way extendable Load capacity*: 50 kg Special feature: Integrated shock absorber; including mounting aid; step-by-step height adjustment; there are three ways to position the column as required Weight: 16.45 kg * With centric load, on a horizontal surface and without lateral forces (wind, impacts, etc.)

Decorative speaker stand with flat steel plate (406 x 406 mm), practical carrying handle and cable duct. The stand is ideal for use where space is limited. There are three ways to position the column as required. In addition to the central and off-center position, the tube combination can also be attached in the corner. The height is fixed with a safety hook and secured with a clamping screw to save noise and play. The slim design of the clamp allows space-saving transport and ensures a discreet appearance. The usable height is between 1,110 and 1,810 mm and is achieved in 4 steps of 175 mm. The maximum load capacity when fully extended is 18 kg. Specifications: Installation dimensions: 406 x 406 mm Color: Black Foot construction: Flat steel plate EAN: 4016842122745 Height: From 1,110 to 1,810 mm Height adjustment: Clamping screw and safety hook Material: Steel Quality level: Topline Pipe end(s): ø 35 mm Pipe combination: 1-way extendable Load capacity*: 18 kg Weight: 10.1 kg Special feature: including mounting aid; integrated shock absorber; step-by-step height adjustment; there are three ways to position the column as required * With centric load, on a horizontal surface and without lateral forces (wind, impacts, etc.)

Special carrying bag made of tear-resistant nylon fabric for 2 spacer tubes with a length of 1,115 mm. The thickly padded bag protects against dirt and scratches. Two robust zippers and comfortable carrying handles offer additional comfort and safety. Specifications: EAN: 4016842122554 Material: Nylon Handle or carrying style: Carrying Handle Mass: 1,115 x 220 x 120 mm Closure: Zipper Special features: for storage and transport of two spacer tubes; two inner compartments.

A short and versatile ceiling mount with a ball joint enabling 360-degree rotation and maximum 90-degree tilt, depending on the loudspeaker model and mounting. Available in black and white powder coat finish. Dimensions: 95mm x 158.5 mm

This simple but steady short truss mount comes with a clamp for Ø 50 mm tube. It is adaptable for: 8000 series 8351B 4000 series

The adjustable ceiling mount is suitable for all 8000 series models. The mounting system has three different height positions, 400, 500 and 600 mm, and a down tilt feature of 90 degrees. A hollow circular tube with an inside diameter of 50 mm allows you to hide the cords, as it is possible to run them through the tube. Available in black and white powder coat finish. Please notice, that a separate T-adapter plate (8000-454) is required with the models 8320 and 8330. Length - Min: 400mm Length - Max 600mm

Special carrying bag made of tear-resistant nylon fabric for 2 spacer tubes with a length of 1,420 mm. The thickly padded bag protects against dirt and scratches. Two robust zippers and comfortable carrying handles offer additional comfort and safety. Dimensions: 1,420 x 200 x 140 mm EAN: 4016842122561 Closure: Zipper Handle or carrying type: handle Material: nylon Special features: for storage and transport of two spacer tubes; two inner compartments Weight: 0.93 kg

3/8 Threaded holder for all microphone bars: 23510 23550 23600 23650 23800 23830

Plastic clamping piece for vertical shaft on 21090 Mic Stands

Universal microphone holder suitable for many applications. The microphone can be mounted vertically or at an angle of 90°. In addition the hexagonal rod can also be attached horizontally or vertically to the table clamp. The clamping width of 0 to 48 mm allows the clamp to be attached to a wide variety of surfaces. Its stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. Clamping range: up to 48 mm EAN: 4016842821525 Length: 308 mm Material: steel Special features: movable retaining clip; adjustable to any angle Threaded connector: 3/8" Type: black Weight: 0.4 kg

attach a distance rod with a M20 connector to a subwoofer with flange adapter. EAN: 4016842103010 Height: 75mm Material: Aluminium Tube Ends diameter 35 mm, threaded bush M20 Type: Black Weight: 0.18 kg

Our best wall mount: the movable brackets adapt to any guitar when hanging. The temples are completely coated with a high-quality plastic protective cover. Execution: white with translucent elements Orientation: straight EAN: 4016842826889 Hanging bracket: self-clamping Weight: 0.149kg Instrument support: Plastic protective cover Dimensions: 94x66x138mm Material: Plastic, steel suitable for: acoustic and electric guitars

02-41-315-55 - Replacement Leg For 15213 Trumpet Stand.

01-84-935-55 - Rubber Foot For 21435 & 21436 Speaker Stands.

3-00-000-117 - Wingnut, Bolt & Washer Assembly For 21435 &21436 Speaker Stands.

Universal wall mount with 3/8" or 5/8" mounting bolt for microphones and antennas. Thanks to the user-friendly ball joint, the mount can be swiveled 360° and tilted 90°. The mounting plate has a diameter of 70 mm and the wall distance is 205 mm. Adjustment: swivel ball joint assembly Angle of inclination: 90° EAN: 4016842119066 Material: steel Mounting: attaches to walls Swivel: 360 ° Threaded connector: 3/8" or 5/8" Type: black Wall clearance: 205 mm Wall plate diameter: 70 mm Weight: 0.475 kg

Professional transport bag for the Wind-Up tripod 24740. Includes wheels for easy, comfortable transport. Upper material made of padded robust nylon fabric. All seams are hand-sewn with high-quality workmanship. Comfortable carrying handles and a durable zipper are further quality features. Special feature: including wheels EAN: 4016842118830 Weight: 2.9kg Handle or carrying method: Carrying handle Dimensions: 1,760 x 235 x 250mm Material: 1680D nylon fabric Closure: zipper

Aluminum knurled threaded disc [black] for end of mic and booms for 5/8" Thread.. Spare Part Number - 03-31-556-15