Penn Elcom - Roadcase, Speaker Cabinet Hardware and 19" Racking

M6 Teenut

Drawer Slides. Demountable.Sold in pairs. Part No. R2412Z Material Steel Closed Length 300mm Extension 302mm Load ...

New and innovative Clip Nuts for Rack Rails.Simply slides onto Rack Rail Square Holes, creating a Threaded Hole and eliminating the need for cage n...

19 inch Rack Mount 6 Way Power Distribution Unit with On/Off overload trip switch, along with master surge and lightening protection plus a LED con...

3U Flanged Perforated Steel Rack Panels.  Part No. R1286/3UVK Material 1.2mm Steel Finish Black Size (U) 3U Weight 0.48kg

2U Rack Panel punched for D-Series Connectors (XLR, Speakon, RJ45, etc.) Part No. R1269/2UK/16 Material 1.2mm Steel Finish Black Connectors ...

Front Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out. Part No. M1908 Material Plastic Descriptio...

Add some texture to your Rack Cabinets with these stylish brushed Anodized Aluminium Rack Panels.The lightweight aluminium allows you to reduce the...

Hybrid ExtrusionShipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight opti...

1U Rack Panel with Cable Support Bar.1U panels punched for 8, 12 or 16 Neutrik D-Series Connectors (XLR, RJ45, etc.)2U panels punched for 16, 24 or...

Pre cut rack strip, full hole, black, 10U - Sold as a pair.Mounting Equipment on Rails:-Use our new and innovative Clip Nuts on Rack Rails for an e...

Pre cut rack strip, full hole, black, 8U - Sold as a pair.Mounting Equipment on Rails:-Use our new and innovative Clip Nuts on Rack Rails for an ea...

Pre cut rack strip, full hole, black, 4U - Sold as a pair.Mounting Equipment on Rails:-Use our new and innovative Clip Nuts on Rack Rails for an ea...

Pre cut rack strip, full hole, black, 2U - Sold as a pair.Mounting Equipment on Rails:-Use our new and innovative Clip Nuts on Rack Rails for an ea...

250mm Deep Beech Wood laminate rack sleeves with M6 threaded rack rails.Made from high quality 18mm laminate boards.Perfect for use in studios, off...

Tour Grade Heavy Duty Rack Drawers with Slam Lock and Keylock- Tour Grade / Heavy Duty Rack Drawer- Space-Saving Flat Front Panel- Reinforced Rack ...

Triangular Corner. Part No. C0679  Finish PennBrite Material 1.2mm Steel Internal Radius 4.1mm Weight 51g

Medium Slam Latch. Part No: L1068Z Finish: Penn Brite Material: 1.2mm Steel Description: Lockable Weight: 0.27kg

Plastic Skid Part No. F1950 Material Plastic Length 494mm

19" Rack Mountable 1U Vented Laptop/Tablet Drawer with Foam Wrist-Pad for support and rear cable access.Key lockable. Part No. EX-6301B Mater...

Small Dish Punched for 1 x 1/4" Jack Connectors  Part No. D0944K Material 1.2mm Steel Dish Depth 13mm Weight 0.11kg

Speaker Clamp Pack of 4 Part No. G0727 Material Plastic Weight 5g

Port Tubes Part No. M1704 Material Plastic Finish Black Diameter 150mm Length 148.1mm Weight 0.16kg

Small Dish Punched for 2 x 1/4" Jack Connectors Part No. D0938K Material 1.2mm Steel Finish Black Dish Depth 13mm Weight 0.11kg

Rack Rail Washer to protect Panel from Screw damage.SOLD INDIVIDUALLY Part No. U5215 Material Plastic Weight 1g

Medium MOL Latch in Plain or Offset Dish Part No. L978/928/07 Material 1.2mm Steel Finish PennBrite Description Offset Dish Maximum worki...

Zinc Die-Cast Top Hat. Part No. M1557 Material Die-Cast Zink Finish Black Diameter 35mm Length 80mm

Die-Cast Corner Castor with Heavy Duty 75mm Diameter Wheel.Offset to suit extrusions up to 35mm Part No. W8675PJPBK Material Die-Cast Zinc Fi...

Heavy Duty Speaker Grille with Welded PVC Surround.Acoustically Approved Mesh, 3.97mm / 3/16" Round Hole on 4.76mm / 3/16" Pitch - 62% Free Air. P...

Table Mounting Latch.Allows a Flight Case Lid to be attached to the side of the Case, and used as a table.Works with R1600, R1602, R1604 or 9967 Ta...

Medium MOL Latch in Offset Dish Part No. L907/928Z Material 1.2mm Steel Description Offset Dish Dish Depth 13mm Offset 27mm Maximum work...

Medium Latch in Plain or Offset Dish Part No. L905/915Z Finish PennBrite Description Plain Dish Maximum working load capacity 90kg Dish De...

Osaka Lockable Draw LatchMade in Japan Part No. L0953N Material Steel Finish Nickel Description Locking Weight 0.18kg

Valance Spanning Overlatch in 10mm Offset Dish, Zinc.Catch Plate (Not included) L0965/CP or L0747/CP  Part No. L0747/38 Material 1.2mm Steel F...

Large Draw Bolt, Padlockable. Part No. L0565 Material Steel Finish Nickel Weight 69g

Surface Mount Flip Handle. Part No. H4051Z Material 1.2mm Steel Finish PennBrite Description With 12mm Grip Weight 0.32kg