ARX - Iso Selector
The simplest ideas are usually the best! The new ISO Selector is a stereo Output signal switcher for the extremely popular Audibox range.
A front panel push switch silently switches a pair of female XLR inputs to either of A or B pairs of XLR male output connectors.
ARX ‘SoftSwitch’ technology achieves this with no loud transients or bangs through the audio system when switching.
Typical applications include switching between loudspeaker speaker systems, or between monitor speakers, equipment testing, and lots more.
Note - Connectors are inserted from the top of the unit. Please allow adequate space above the ISO Selector to allow for the connectors to be removed and / or replaced.
Stereo Output selector. A front panel push switch silently switches a pair of female XLR inputs to either A or B pairs of XLR male output connectors. Very simple but very effective!
|Frequency Response:||DC to Daylight ± 0.0dB|
|Power Requirements:||None, passive unit.|
|Input Connectors:||2 x Left and Right Female XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold.|
|Output Connectors:||2 x A and B Male XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold.|
|Chassis:||Is grounded and earthed via Pin 1 Ch A input Female XLR Connector|
|Construction:||All-steel chassis, textured blue polyurethane paint, epoxy printining, fibreglass PCB|